<VV> did the maaco thing

Chuck Kubin dreamwoodck at yahoo.com
Wed Jun 14 18:15:16 EDT 2006


I too did the Maaco thing with my '91 S-10, but not on a whim.  I visited three shops plus the competition, watched for specials and inspected their work. I started by looking at who did the best job of applying a clean, even finish and who was best at keeping things clean that didn't get paint. I rejected any shop that wouldn't let me in to see work in progress, wouldn't answer detailed questions, or didn't appear to be professionally maintained.
   I picked the one who seemed, from what was actually coming out of the shop, to be doing the best job on a consistent basis. I also paid particular attention to cars of a similar age and color to get an overall impression.
  Then I discussed the work in precise detail, learning that their sanding, prep and prime is limited and NOT intended to take out all the flaws. They will do extra prep, as you pay for it. My advice, do most of the prep yourself and fix ANYTHIING you think they might not fix. Then take off all the trim bits and reinstall them yourself. Good examples are the fuzzies and emblems. Why risk even a slightly uneven mask job when you cnan reinstall a perfectly clean part?
  Maaco also guarantees their work, so if you find a flaw that THEY caused, they will fix it right away.
  I painted at a time when they had  some good package deals and negotiated in most of the costs for the jams and inside the bed. The truck looked fantastic, for about half of what I thought I'd spend and about a fifth of what it would have been at a body shop.
   
  Chuck Kubin
  

J R Read_HML <hmlinc at sbcglobal.net> wrote:
  Put an order with Lon and get the little hoe wheels car thrown in!

Later, JR

----- Original Message ----- 
From: 
To: ; 
Sent: Wednesday, June 14, 2006 3:49 PM
Subject: Re: did the maaco thing


>
>
> In a message dated 6/14/2006 11:52:46 AM Pacific Standard Time,
> emarschn at gmail.com writes:
>
> 67 Monza Convert - I went to Maaco for paint and I'm actually pleased
> with the results.
>
> http://www.flickr.com/photos/jaxed/165454705/
>
> That said, I need to put my rocker trim back on but I have no clue
> where to drill the holes as this car had new rocker panels welded in.
> Is there a template for this?
>
> Also, I'd like to doll the Monza up a bit with wheel well trim - but I
> see 66-69 wheel well trim on eBay going for crazy prices. Has anyone
> had luck with aftermarket wheel well trim, like the stuff you get at
> Autozone? Should I not even bother?
>
> Thanks
> Eric
>
>
>
> Eric the pic loks great!
>
> How does it look from 3 ft away.
>
> That is the acid test
>
> Tim Abney
> Inland Empire Corvair Club
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.4/363 - Release Date: 6/13/2006
>
> 

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________


 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the VirtualVairs mailing list