<VV> Re: Monza Tach

[Padgett]

>Anybody have recent experience adding a tach to a Monza dash?

No but I just added a 2" dual CHT gauge into the clock (center) opening. 
The blank removes and I used a hole saw to drill the hole and insert the 
gauge. I did have to remove the glass face because the glare in a vert was 
really bad.

Just measured the face and it looks like up to about a 3 1/2" diameter face 
would fit

Possibilities:
http://www.jcwhitney.com/autoparts/Product/showCustom-0/Pr-p_Product.CATENTRY_ID:2008905/c-10101/Nty-1/p-2008905 
has a 2" face and is 0-8000 . Think I would prefer the 0-6000
http://www.jcwhitney.com/autoparts/Product/showCustom-0/Pr-p_Product.CATENTRY_ID:2008899/c-10101/Nty-1/p-2008899
but it may be a tight fit (would probably need to remove the bezel but that 
would be necessary anyway, might need to trim the face a bit to add the 
flat on the side).

Would be interested to know what you find.

Padgett