<VV> Windshield washer nozzels

[Jim Houston]

I used CLR to clean my nozzles...  works great!

Jim Houston
Brandon, FL

Dennis & Debbie PLEAU wrote:
> Dry the acetone real well and then soak in vinegar or a cleaner called 
> CLR.  Ward water deposits are not soluable in acetone but very well 
> may be disolved in an acid or a cleaner designed to disolve them.
>
> dp
>
>
>> From: "Cepak, Tom A" <tom.a.cepak at lmco.com>
>> To: virtualvairs at corvair.org
>> Subject: <VV> Windshield washer nozzels
>> Date: Thu, 25 May 2006 09:04:50 -0500
>>
>>
>> Does the EM Corvair share a common windshield washer nozzel with any of
>> its GM bretheren?  I've had these nozzels soaking in acetone for 2 days,
>> and I still can't blow compressed air through them, nor can I run a
>> small stiff wire through them.  I've looked in both online catelogs
>> (Underground and Clarks) and they are not listed.  Any suggestions would
>> be greatly appreciated.
>>
>> Tom Cepak
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>