<VV> turn signal switch

[corvairduval at cox.net]

If late 65 or 66, the switch is held onto the steering shaft with a
difficult to remove snap ring. Look closely at shaft and use very small
screwdrivers and ice picks to remove the snap ring.

Frank DuVal

Original Message:
-----------------
From: ron turner ron67ran at hotmail.com
Date: Tue, 03 Apr 2007 13:01:18 +0000
To: virtualvairs at corvair.org
Subject: <VV> turn signal switch


need to replace switch with unbroken used assy out of parts car---have it 
disassembled down to switch still on shaft--do you gently pry forward to 
have it slide off shaft or is it held by something I cant see? Dont want to 
break it as these things are expensive. Would it be easier to just remove 
whole column and repaint to match and reinstall ?

_________________________________________________________________
Get a FREE Web site, company branded e-mail and more from Microsoft Office 
Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________

--------------------------------------------------------------------
mail2web LIVE – Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE