<VV> Electric fuel pump

[J R Read_HML]

A pusher installed AT the tank.  But all of mine are stock.

The float or other part of the sender is caught on the side of the tank. 
Either that or you installed the wrong sender - LM VS EM.  It IS grounded, 
right?

Later, JR

----- Original Message ----- 
From: "Brad Waddell" <bradwaddell at sbcglobal.net>
To: <virtualvairs at corvair.org>
Sent: Monday, December 17, 2007 1:56 AM
Subject: <VV> Electric fuel pump


>I want to install and electric fuel pump to help the fuel delivery.  Should
> this pump be a pulling pump as the engine or should it push from the tank?
>
>
>
> Any Sugestions in brands?
>
>
>
> Also, The gas gauge pegs to full as soon as you turn the car on and stays
> there.  When you unhook it, it resets, but as soon as it gets power, it 
> does
> it again.  Any ideas as to what could be causing it?
>
>
>
> Tank and sender are both brand new.
>
>
>
> Cool thanks
>
>
>
> Brad
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________