<VV> 61 Rampie - Brake lights

[Frank DuVal]

Do the turn signals work correctly? The brake light switch feeds through 
the turn signal switch to light the rear bulbs.

Frank DuVal

Rex Chivers wrote:

> First thanks to all who responded to my questions about replacing the 
> tail light sockets.  I was able to pick up two replacements from the 
> local flaps and install them in place of the old ones.  Good news is 
> that I now have tail lights on both sides, bad news is there are no 
> brake lights.
>
>      I did verify that the sockets and tail lights both worked 
> properly by hooking each lead to the battery and grounding the 
> housing.  I have removed the brake light switch and verified that it 
> is getting 12 volts, and that is working properly, and fuses are ok.  
> Where do I go next ?
>
> TIA
> Rex
> 65 Monza Vert
> 61 Rampie (almost on the road)
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>