FW: <VV> ENGINE MISS/LOSS OF POWER

[Brandes, Guy]

Hey Doug,

Did you every find the solution?

Regards,

Guy Brandes

65 VAIR 140

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of J R Read_HML
Sent: Wednesday, January 17, 2007 2:29 PM
To: Brandes, Guy; virtualvairs at corvair.org
Subject: Re: <VV> ENGINE MISS/LOSS OF POWER

And if that is not the answer, check the carb linkage to be sure
everything 
is in place and not catching on a plug wire or vacuum line.

It seems to me that after a 10 mile drive, the distributor cap should be

pretty well dried out - if it even got wet.

Later, JR


----- Original Message ----- 
From: "Brandes, Guy" <GBrandes at loebermotors.com>

I WOULD LOOK AT THE DISTRIBUTOR CAP FOR MOISTURE 1ST.

Guy Brandes

From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of The Barneck's

cleaned everything up, and put it back together.  drove it home 10 miles
with no problems.

When I drive it the next time, I am getting an excelleration miss.


Thanks
DougBarneck

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________