<VV> headlights

[JVHRoberts at aol.com]

Sounds like a BUNCH of bad grounds, etc. Make sure you have a GOOD SOLID  
ground at EACH headlight plug. Then check to make sure the headlight plugs are  
in good shape, and actually making contact. 
And last but not least, make sure the sealed beams are good! Digital  
mulitmeters are wonderful tools.
 
In a message dated 3/24/2007 6:28:16 PM Eastern Daylight Time,  
hanssmom at cox.net writes:

Greener  than green question but I'm winging it today so be nice?.  New
dimmer  switch.  On low beam, have right low beam only.  On high beam,  have
both low beams only.  No high beam anywhere.  All other  lights, brakes,
parking, turn signals  work.



Suggestions?



Connie

Iowa


 



************************************** AOL now offers free email to everyone. 
 Find out more about what's free from AOL at http://www.aol.com.