<VV> Throttle Return Spring - 140 motor

[Bryan Blackwell]

Keith,

Stock is just one spring from the front shroud to the throttle rod  
attachment to the cross shaft.  If all is well, that should be  
sufficient.  I'd suggest using one of the vendor kits to reduce the  
slop first, that's most likely the problem.

--Bryan

On Oct 2, 2007, at 2:11 PM, Keith Onchuck wrote:

> Can someone point me to a good picture of how their
> throttle return spring(s) are setup on a 140?  I was
> thinking if there was a spring on each primary carb it
> would work better.  I planned to fabricate a mount on,
> or by, the carb to connect a spring to but want to
> poll the experience here.  Any ideas or pictures are
> appreciated.