<VV> What secures the damper door hinge pin?

[J R Read_HML]

That works too!
Later, JR

----- Original Message ----- 
From: "DaveL" <lynchmob at theriver.com>
To: "Kent Duncan" <kent_duncan at yahoo.com>
Cc: <VirtualVairs at corvair.org>
Sent: Tuesday, April 15, 2008 2:12 AM
Subject: Re: <VV> What secures the damper door hinge pin?


> A fix was mentioned at our club's Sunday tune-up clinic.
> Drill a small hole in the pin near the head where it will clear the
> sheetmetal when it's in place. Then install a small cotter pin. That 
> should
> hold it in for good.
> I'm going to try it on my broken one this week. It sounds like a great 
> fix.
>
> Dave Lynch
> '67 Monza 110/PG
> Vice-President
> Tucson Corvair Assoc.
> www.corvairs.org
>
>
> ----- Original Message -----
> From: "Kent Duncan" <kent_duncan at yahoo.com>
> To: <virtualvairs at corvair.org>
> Sent: Monday, April 14, 2008 5:30 PM
> Subject: <VV> What secures the damper door hinge pin?
>
>
>> What secures the pivot pin that holds the damper doors
>> in place where the air exits the lower shrouds?
>>
>> I've lost one that appears to simply have wiggled its
>> way loose, and am ready to replace it, but don't see
>> that anything but the tension provided by the
>> thermostat rod would keep things secure.  I think
>> that's what I trusted the last time...
>>
>> Thanks,
>>
>> Kent Duncan
>> '66 Monza 110 4-speed
>>
>>
>>
> ____________________________________________________________________________
> ________
>> Be a better friend, newshound, and
>> know-it-all with Yahoo! Mobile.  Try it now.
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>>  _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
> the property
>> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>>  _______________________________________________
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________