<VV> Ignition coil wiring
Harry Yarnell
hyarnell1 at earthlink.net
Sat Aug 2 14:13:06 EDT 2008
The condenser goes to the + term. of the coil. It's for radio supression of
RFI. The Corsa model had a lead to the - side for the tach. Usually the only
lead on the - side is to the points (assuming you still use points).
Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message -----
From: <AKACUBED at comcast.net>
To: <VIRTUALVAIRS at CORVAIR.ORG>
Sent: Saturday, August 02, 2008 11:41 AM
Subject: <VV> Ignition coil wiring
> Hello All,
> My 65 Monza has a condensor on the side of the ignition coil. Does
> any one know if the wire coming from this condensor hooks to the negative
> side or positive side of the coil? I don't see it on the wiring schematics
> in the shop manual although I do see a wire coming from the wiring harness
> to the negative side of the coil on the schematic which my car does not
> have on its harness. I do have the distributor wire going to the negative
> side of the coil though. I appreciate any help. Thanks and I hope all have
> my new email address, it is akacubed at comcast.net. Thanks again.
> Abe.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
More information about the VirtualVairs
mailing list