<VV> FW: Pitman arm bushing removal

[Harry Yarnell]

The 'easiest' way to remove the bushing steel shell, is with a hacksaw. Slit 
it, and roll it onto itself, and pull out.

Harry Yarnell
Perryman garage and orphanage
Perryman, MD
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Dennis PLEAU" <ddpleau at msn.com>
To: <virtualvairs at corvair.org>
Sent: Sunday, November 30, 2008 10:39 AM
Subject: <VV> FW: Pitman arm bushing removal


>
> I forgot to copy the list
>
> Beat the bolt out with a hammer, remove the rubber with a knife.  Usually 
> they will just fall apart.  Some of the plastic ones are made to go inside 
> the metal shell so you don't have to remove it, others you have to remove 
> the shell which can be a bitch without a press.  You wi9ll have the drag 
> link off which will make it easier.  I'm not sure which bushing Cal is 
> selling, but Lon was selling both sizes.
>
> dp
> _________________________________________________________________
> Windows Live Hotmail now works up to 70% faster.
> http://windowslive.com/Explore/Hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_faster_112008
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>