<VV> Temp readings as regards oil temp issues

[Stephen Upham]

These numbers never match in the postings like I type them in.  The  
oil filter and gauge numbers should match top and bottom (slightly  
off).  The pan numbers were taken in the last three readings and  
should go under the 146 - 156 -155 column of the oil filter.

the head temps and the CHT temps should line up under each other for  
three groups of readings.

agggghhh

Stephen


Message: 2
Date: Sun, 7 Jun 2009 11:08:41 -0500
From: Stephen Upham <contactsmu at sbcglobal.net>
Subject: <VV> Temp readings as regards oil temp issues
To: Virtual  Vairs <virtualvairs at corvair.org>
Message-ID: <0CDF06EB-9E17-4313-8A8F-EAE73B7184F7 at sbcglobal.net>
Content-Type: text/plain;	charset=US-ASCII;	delsp=yes;	format=flowed

I would have to remove the cover to measure the oil cooler temps.  I
did some investigation in the garage this morning.

Oil temps:
at the filter:  110 - 127 - 129 - 141 - 146 - 156 - 155
         gauge :  180 - 210 - 215 - 220 - 225 - 230 - 225
       oil pan :                          191 - 192 - 191

Cylinder head temps:
at the head measured at the rear wheel under the top shroud:
                   195 - 202 - 194
at the CHT gauge 210 - 210 - 210


Opinions welcome...ggg

Stephen