<VV> Part needed / now Elect. Advice

[Bryan Blackwell]

I'd like to hear the answer too - I ran a positive lead from the  
starter to the rear junction, but I like Mike's idea of going direct  
to the fuse box instead.  That would also eliminate a couple of wire  
connections.

--Bryan

On Nov 20, 2009, at 10:57 AM, Mike Stillwell wrote:

> Hey Dave - Please forgive the hi-jacking here, but since you  
> offered...What's your take on relocating a battery to the front? I  
> have 20' of cable for the pos. to starter cable and was going to  
> drill and tap, then weld a ground stud onto the front right frame  
> rail for my neg. In the back, I should probably replace the plastic  
> positive junction block, although I've not had problems with them.  
> Should a run a separate positive to the rear, or just to the  
> ignition switch (less weight is good for a racer)? I have 5 grounds  
> for the motor to body already.
>
> Thanks in advance,
>
> Mike
> YS-117