<VV> wrinkle finishes

[Dave Keillor]

The trick is to use the very flexible masking tape that is made for this
type of masking.  I got mine from Eastwood.

Dave Keillor
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Ray "Grymm"
Rodriguez
Sent: Tuesday, August 17, 2010 5:18 PM
To: N2VZD at aol.com; virtualvairs at corvair.org
Subject: Re: <VV> wrinkle finishes

While on the wrinkle paint topic, is there some kind of creative trick
for 
making the silver parts silver?  Masking around curves is not much fun
and I 
figure in your vast experience some of you *cough geezers cough* might
have 
found a better way.

Ray "Grymm" Rodriguez III
Lake Ariel, PA
CORSA member
66' Corsa 140/4 coupe
65' Corsa 140/4 coupe (under construction and almost done!)
63' Monza PG coupe (almost done!)


----- Original Message ----- 
From: <N2VZD at aol.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, August 17, 2010 3:51 PM
Subject: Re: <VV> wrinkle finishes


>a lot of different wrinkle finishes are available off shelf.  krylon
still
> makes it. i bought a case of black from strathmore paint store in
Syracuse
> a few years ago.  it is available at websites for antique radio repair
> parts.
> radio daze , antique radio supply are a couple out there , but look at

> your
> local NAPA store for black or silver.
> regards, tim colson
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights
are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________ 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________