<VV> Aluminium cylinders with cast iron liners

[Mark Durham]

Pramod, pictures please.
Thanks  Mark Durham

On Sat, Jan 16, 2010 at 10:35 AM, Pramod Kotwal <pramodkotwal at yahoo.com>wrote:

> Hi,
>
> I have developed and produced cylinders for Corvair engines.
>
> These cylinders consist of centrifugally cast iron liners in aluminum
> cylinders. Cooling fins on these cylinders are similar to those on stock
> Corvair jugs.
>
> The aluminum cylinders rest against a step in the liners and are fixed to
> the liners with a high temp adhesive. They replace the stock jugs without
> any changes.
>
> I can supply cylinders for 64 and 65 heads on stock, +20 or +40 bores.
>
> I am also developing similar cylinders with 92 mm bore, but with a bolt
> pattern to suit the VW engine. These can be adapted and used in a Corvair
> after modifying heads and cases.
>
> Please contact me off list for delivery and price.
>
> Pramod Kotwal
> Aerovair
> (978) 458 3030
> pramodkotwal at yahoo.com
>
>
>
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>