<VV> a device for parts cleaner reclamation

[Louis Armer]

Sounds great to me, YOU try it and let us know how it 
works.................you could pop rivet the medias screens in place
Chuck Armer
/////////////////////////////////



At 12:24 PM 7/19/2010, you wrote:
>hi guys
>here is an idea for a device for parts cleaner reclamation
>a series of five gallon plastic buckets, cut the bottom off of a 
>select few and
>rubber band or duct tape different media screens, starting from the top with
>coarse and finer at the bottom planes if you will.
>Collars at the top of each bucket to remain to enable "stacking" and 
>removal of
>each media screen or disposal of contaminants.
>Sketch shows use of 16x18 fiberglass screening, a scotchbrite disc from a
>commercial floor scrubbing machine, and cheesecloth, maybe furnace filter
>material, or whatever your heart desires.
>compliments from a mann with too much time on his hands
>-chris
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: 100719 bucket.jpg
>Type: image/jpeg
>Size: 412357 bytes
>Desc: not available
>Url : 
>http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20100719/2b3eb70a/attachment.jpg 
>
>  _______________________________________________
>This message was sent by the VirtualVairs mailing list, all 
>copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________

CORSA Member
Corvanatics Member
Corvair Atlanta Director
1965 Corsa Coupe
1964 Greenbrier
http://darthvair.com
SECC Member
1965 Corsa Autocross car 1/2 owner
http://www.wtbrt.com/