<VV> start solenoid

Harry Yarnell hyarnell1 at earthlink.net
Tue Apr 19 20:31:47 EDT 2011


Are you sure you have the purple wire going to the S terminal, and the
yellow to the R?

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Ramon Rodriguez III
Sent: Tuesday, April 19, 2011 7:07 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> start solenoid

Alrighty, figured it out.

The problem was a defect in the new solenoid assembly.  We took the cover
off the end and saw it clear as day, the disc inside was touching not only
the 12v contact and the contact to the starter, but also the "switch"
wire... feeding current back into the coil and preventing it from
deactivating until current was cut off to the 12v input (disconnecting the
battery).

Thanks all,

Ray R.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________



More information about the VirtualVairs mailing list