<VV> VALVE SPRING COMPRESSOR USE
N2VZD at aol.com
N2VZD at aol.com
Mon Apr 25 07:02:53 EDT 2011
in most cases , you must hit the top retainer on each valve (trying not to
damage the tip of the valve!) before attempting to use the compressor. i
spray all with blaster , then hit them all kinda sideways , then put the
compressor to them. i drill a block of wood to hold the valves in the order
they came out of the head. mark the block, then a punch mark on the head at
the first one. if any burrs on the end of the valve , clean it off with a
file , or rotary sand wheel ( i have used a dremel disk on worn ends ) ,
before attempting to pull the valve out of the guide. be sure to check for
guide wear...
this is just a quick overview of how i do it.
regards, tim colson
More information about the VirtualVairs
mailing list