<VV> # 10 Wire for idle circuit

[wfcc at mediacombb.net]

Do I detect just a hint of sarcasm here ? Or is this some of Smittys' "oldtimers" kicking in ?
 I can beat his price on the needle valve- I'll let you have 2 for $10 or 3 for $20 (I only accept $3 bills-correct change only).

                                         Ed Lindsay
                                           West Florida Corvair Club
----- Original Message -----
From: Smitty <vairologist at cox.net>
To: virtualvairs at corvair.org
Sent: Thu, 28 Apr 2011 14:11:19 -0500 (CDT)
Subject: <VV> # 10 Wire for idle circuit

Smitty says;  I had a length of # 10 house wire.  Black, white and ground. 
I used a short piece to clear out the idle circuit but it seemed to be 
stopped up..  Got a hammer and tried to drive it through but it wouldn't go. 
Tried to pull it out but it twisted off.  Cut it off flush and melted solder 
into the hole.  Now the car doesn't run right.  I'll figguer it out.  BTW, I 
have an extra needle valve I can't use if somebody wants to give me $10 for 
it. 

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________