<VV> choke pull off ?

[Frank DuVal]

In general on most v-8  engines the choke pull off is mounted on the 
carburetor. Just Google "choke pull off" and there are images of carbs 
and pull offs.

Note 1, a Corvair (Standard Ignition p/n CPA22) pull off should pull a 
full vacuum, no bleed hole. i.e.you can suck on the hose, the plunger 
will pull in, cover the hose with your tongue and the plunger will 
remain in for a loooong time. Some other engines use choke pull offs 
with calibrated bleed holes, so the suck/tongue test is not correct. 
But, the plunger should still pull in with vacuum, just not stay in.

Note 2, on a four barrel carburetor look for the choke pull off 
connected to the primary chokes. The object connected to the secondary 
chokes (if there) controls when the secondaries come on more than it act 
like a choke pull off.

Frank DuVal

On 1/15/2011 5:32 PM, Trey Bosson wrote:
> where is the choke pull off  on a v8 vair  toronado converted 66 engine
>
>