<VV> Sealing the flexplate bolts
Rick Norris
ricknorris at suddenlink.net
Mon Jan 31 14:22:58 EST 2011
Its pretty good on toast....
The Lone Haranguer
>I am a big proponent of Mercury/Mercruiser ,"Sealer 1000". I have never
>used it on a Corvair , but , I have used it on so many other things , that
>I am sure it would work well..................
> Might be worth serious consideration , ..... Bob
>
> I might caution against this stuff, because it's full of Teflon. As such,
> it will actually reduce any thread locking ability. I've had experiences
> with other mechanical assemblies where the threads of a power transmitting
> assembly were sealed with a Teflon sealant, and we couldn't get the bolts
> to stay tight! If it were me, coating the mating faces of the flex plate
> and the undersides of the bolt heads with gasket sealer would do an
> admirable job. That's what we did! Leave the threads alone, as any sealant
> I can think of will cause torquing inaccuracies, etc.
> John Roberts
More information about the VirtualVairs
mailing list