<VV> Fw: Clarks Oil Filters

[Michael Kovacs]

 MIKE KOVACS



----- Forwarded Message ----
From: Michael Kovacs <kovacsmj at sbcglobal.net>
To: Frank DuVal <corvairduval at cox.net>
Cc: "virtualvairs at corvair.org" <virtualvairs at corvair.org>
Sent: Mon, October 17, 2011 1:53:56 PM
Subject: Re: <VV> Clarks Oil Filters

Currently using 2 clarks filters, no problems. Just check the good seals and the 
threaded area is installed.

MIKE KOVACS

--- On Mon, 10/17/11, Frank DuVal <corvairduval at cox.net> wrote:

From: Frank DuVal <corvairduval at cox.net>
Subject: Re: <VV> Clarks Oil Filters
To: 
Cc: "virtualvairs at corvair.org" <virtualvairs at corvair.org>
Date: Monday, October 17, 2011, 12:09 AM

My problem was there were no threads where the bolt goes. Of course I didn't 
notice until the special bolt got real tight way too soon! I had to use a 
different filter and bolt. I still have a new one without threads. 


I have bought several Wix from Rock Auto recently instead of threading the C47c 
ones. 


Frank DuVal

On Oct 16, 2011, at 10:59 PM, kenharri at comcast.net wrote:

> 
> 
> Hello, 
> 
> 
> 
> I hear a few complaining specifically about Clarks C47c oil filters.  I have 
>seen the tech articles about "the problem".  I, personally have never have a 
>problem with a C47c.  How many out there have had a problem? 
>
> 
> 
> 
> I wonder. 
> 
> 
> 
> Just wanted to add my experience, no problem, maybe I am just lucky so far? 
> 
> 
> 
> Kent Harrington 

_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________