<VV> Fan belt clearance

[Mark Durham]

FYI, my description for moving the engine was because there wasn't
enough clearance between the frame and oil filter adapter. I did
convert my 62 102 to a 110 with dampner, and I did install a 64
bracket. Mark Durham

Sent from my Windows Phone
From: Matt Nall
Sent: 1/12/2012 18:16
To: virtualvairs at corvair.org
Subject: Re: <VV> Fan belt clearance



I just aquired a 62 with a 110
motor...It appears I have no clearance for removing the fan belt by
the harmonic
balancer. I know I need to change out the rear support but to what? a
64? Been a
long time since I had this issue. The other being I don't have any other early
supports laying around. Inquiring minds need to know.

John

=====================================================




 Yes..64  or any earlier engine with AC...


OR  just trim yours...  It's only a hanging load..very little twist with the IRS


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Patio
http://tinyurl.com/Matts-Tech-Pages











 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________