<VV> rocker molding removal?

[J R Read]

There is a metal retainer attached to the body roughly 2/3 of the length of 
the bright metal rocker trim.  It is more or less centered in the trim 
piece, so the first several inches are not held by it.  Once the screws are 
out, start at one end of the trim and lift from the bottom side of the trim. 
Work you way along and lift the bottom of the trim piece off of the 
retainer.  Just move along a couple of inches at a time so as not to damage 
(kink) the trim.

Later, JR


----- Original Message ----- 
From: "rich dixon" <dixon5553 at yahoo.com>
To: <virtualvairs at corvair.org>
Sent: Saturday, November 17, 2012 7:35 PM
Subject: <VV> rocker molding removal?


Hi - what is the trick to removing the long chrome strip molding mounted on 
the rocker panel on late models? I know there two screws are the ends, but 
once there off, how do you move this piece? Are there clips, if so how do 
you the trim to get it off?

Thanks

Rich
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________