<VV> pushrod tubes

[ScottyGrover at aol.com]

Pushrods are 5/16" O.D. x 10-1/4" overall length; tubes are 43/64"  O.D. 
between head and crankcase, 0.985" O.D.  at O-rings, 7-11/16" long  between 
O-rings, 8-3/16" O.A. length.
 
I hope this helps,
 
Scotty from Hollyweird
 
.
 
In a message dated 9/12/2012 9:42:06 A.M. Pacific Daylight Time,  
jryonlucke at gmail.com writes:

Would  somebody please send me the outside diameter of the tube portion of  
a
pushrod tube? I'm 900 miles away from my Corvair stuff.... Diameter of  the
pushrod would be handy, too.  Thanks.
_______________________________________________
This message was  sent by the VirtualVairs mailing list, all copyrights are 
the property
of  the writer, please attribute properly. For help,  
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of  America, 
http://www.corvair.org/
Post messages to:  VirtualVairs at corvair.org
Change your options:  
http://www.vv.corvair.org/mailman/options/virtualvairs  
_______________________________________________