<VV> Carb cleaners

[kenpepke at juno.com]

I also had a 5 gal pail (with basket) … I believe it was referred to as 'Hydro-Seal.'
I used it for carbs and even cylinder heads (1 end at a time.)  When clean, the
parts were to be washed off with water.  It was quite pungent.  If it got on my
hands it would leave the skin VERY dry but did not 'burn.'

It used a layer of water on top to keep the working fluid from evaporating.  That 
can also failed after many years and the fluid soaked into my basement floor.  It
mostly rinsed off but that small area of the floor would not hold paint well.


Ken P
Wyandotte, MI
65 Monza 110hp 4 speed 2 door
Worry looks around; Sorry looks back, Faith looks up.

**************************

On Feb 11, 2014, at 1:36 PM, "Rick Norris" <ricknorris at suddenlink.net> wrote:

> I had a similar incident with the good old nasty stuff. My container was
> very aged also and I noticed it was beginning to ooze thru the steel bucket
> seam. I placed it in a 5 gallon plastic pail but, after some time I had to
> get rid of it. We won't talk about how….

>>snip<<

> 
> Rick Norris
> 1st CORSA President, 1971
> www.corvairalley.com
> Hurricane WV