<VV> Pre-testing 140 before running

[Charlie]

Thanks ~ 

Since it was sitting a while, I added Mystery Oil + a bit of 10w30 to each
plug hole to let it seep in before turning it.

Without measuring the torque needed, it turns fairly easily with little
effort, but doesn't feel "smooth" (it is reputed to have been rebuilt before
sitting for about a year in SoCal single-digit humidity, so that's better
than north east levels!

The real test is when I put the starter on it, but I want to make sure there
are no friction drag due to even minimal internal surface rust.

So, I'll use the starter sparingly until I feel OK with it.

Should I spin the oil pump before I run the starter, just to get the juices
flowing?

Charlie


-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
corvairduval--- via VirtualVairs
Sent: Friday, May 30, 2014 7:33 AM
To: virtualvairs at corvair.org
Subject: Re: <VV> Torque needed to turn 140 without plugs to test it out of
car?

5 to 10 foot pounds? Without plugs there is no compression to overcome, just
valve spring tension, so it should turn easily.

Sometimes rust does form in the cylinders (always here in the east!). So the
first attempt may take some extra effort. Spray your favorite rust
penetrant/lube into all three spark plug holes before you try to turn it.
Dragging unlubricated rings along the cylinders is not the best course of
action.

Frank DuVal

Original email:
-----------------
From: Charlie chaz at properproper.com
Date: Fri, 30 May 2014 06:55:51 -0700
To: shortle556 at earthlink.net, hmlinc at sbcglobal.net, corvairduval at cox.net,
virtualvairs at corvair.org
Subject: Torque needed to turn 140 without plugs to test it out of car?


I'm want to test the 140 out of car before installing it, to make sure it'll
work first.

What kind of torque is needed to turn a 140 without plugs, just to turn it,
to see if it's "free-turning" enough to put it together, and into the car?

Charlie

--------------------------------------------------------------------
mail2web.com  Enhanced email for the mobile individual based on Microsoft
Exchange - http://link.mail2web.com/Personal/EnhancedEmail


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________