<VV> '62 Monza Distributor.

[Jay Maechtlen]

On 7/8/2015 10:28 PM, Ron Hinz via VirtualVairs wrote:
> My ‘62 Monza runs terribly and barely made it home recently from a nearby car show.  The engine runs very unevenly with an on/off feeling.  On checking the Pertronix equipped distributor, I noticed significant vertical play of about 3/16” in the distributor shaft.  Is this a normal amount of free play?  I was planning to remove the Pertronix and try points to see if the Pertronix could be the culprit.  Since the uneven running exists at all speeds with a stall at stoplights, I am thinking that it’s not a fuel flow problem.
Also - loose wires or wires broken internally.
ign > dist > ptx unit.
- and grounds in the dist and for the ptx.

> Any ideas on this?
> Ron Hinz
>   _________


-- 
Jay Maechtlen
SoCal
'61 2-dr modified w/fiberglass skin,
transverse 3.8 Buick V6 TH440T4 trans

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus