<VV> Unisyn Question

[Dave Keillor]

I've given up on my managehelic and gone back to the Unisyn.  The
magnehelic is too sensitive.  It's okay for a balance at idle, but I like
to also balance around 2K rpm.



Dave Keillor

On Wed, Oct 7, 2015 at 10:11 AM, Joel McGregor via VirtualVairs <
virtualvairs at corvair.org> wrote:

> This brings up a question I've been pondering.  Which is better?  Balance
> vacuum or flow?  The Unisyn is measuring flow which isn't necessarily the
> same.  In a perfect world they would be but....
>
> Joel McGregor
>
>
> ________________________________________
> From: VirtualVairs [virtualvairs-bounces at corvair.org] on behalf of Daniel
> Monasterio González via VirtualVairs [virtualvairs at corvair.org]
> Subject: Re: <VV> Unisyn Question
>
> Bob,
>
> I prefer to adjust it at about half the escale. Unisyn is for balancing
> only, to read vacuum use a vacuum meter.
>
> Daniel
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>  _______________________________________________
>