<VV> Want rolling chasis with engine removal?

Fri Aug 5 16:32:41 EDT 2016

It unscrews.

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
Ignacio Valdes via VirtualVairs
Sent: Wednesday, August 03, 2016 9:47 PM
To: Virtual Vairs
Subject: Re: <VV> Want rolling chasis with engine removal?

The engine is down. I took off the shift cable but did not notice the
speedometer cable at the differential. How does the speedometer cable come
off? I took the 7/16th bolt and the shim off but it still wants to remain.
I've tugged on it but it isn't moving. Pull harder?

On Thu, Jul 28, 2016 at 8:14 PM, Ignacio Valdes <ivaldes at hal-pc.org> wrote:

> Is there a way to get the front motor mounts off without taking the 
> suspension off? I am nearly ready for the big drop on the engine. I am 
> trying to get the front mounts off. I am not trying to take off the 
> castle nut for now, instead going for the two 9/16ths on either side. 
> They both spin and spin. I can probably reach the bolt head on top of 
> one but the other bolt head seems inaccessible with the suspension on. 
> I would rather not take the suspension off if I can. Does the castle 
> nut bolt spin as well without something up above it? They are rusted 
> and my air impact does not make an impression on it, just spins.
>
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________