<VV> Speedo shakey

[jim bannister]

Could the end of the speedo cable that engages into the wheel bearing cap
have some issue?  Stripped boss in the cap maybe or the tittie from the
cable not long enough to engage properly.
Jim B. '66 turbovert

-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
Matt Nall via VirtualVairs
Sent: Monday, June 13, 2016 6:50 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> Speedo shakey



I am having some issues with my speedometer.  Basicly it is wobbly readout
below 30 MPH and very smooth above that speed.But  below 30 it will wobble a
lot. Any ideas? Speedo cable is fairly new. Thanks for any suggestions. John
Gull in Asheville NC ======================================


Remove cable at Speedo head and spray some lube on the brass  shaft...  most
likely dry..





Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio

http://tinyurl.com/Matts-Techpages









 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________