<VV> 64 CONVERT with window problem.

[N2VZD at aol.com]

This is a non rusty original very nice  car worthy of show , and you  will  
see it around soon. It is Another of Phil Domsers fleet now. I think  I 
have issues related to it sitting (in good storage) a long time by previous  
owner  , who was sick.
  I guess I am elected to tear into it now.
Regards, Tim Colson  (NOT a body man)
 
 
In a message dated 5/5/2016 12:00:07 P.M. Eastern Daylight Time,  
virtualvairs-request at corvair.org writes:

Send  VirtualVairs mailing list submissions to
virtualvairs at corvair.org

To subscribe or unsubscribe via the World Wide  Web, visit
http://www.vv.corvair.org/mailman/listinfo/virtualvairs
or, via email, send  a message with subject or body 'help' to
virtualvairs-request at corvair.org

You can reach the person managing the  list at
virtualvairs-owner at corvair.org

When replying,  please edit your Subject line so it is more specific
than "Re: Contents of  VirtualVairs digest..."


Please also edit to include only the topic  you're responding to when 
replying to a Digest.
This message was sent by  the VirtualVairs mailing list, all copyrights are 
the property
of the  writer, please attribute properly.
For help, mail to:  vv-help at corvair.org
Archives at  http://www.vv.corvair.org/pipermail/virtualvairs/
This list sponsored by  the Corvair Society of America, 
http://www.corvair.org/
Change your  options:  
http://www.vv.corvair.org/mailman/options/virtualvairs
http://www.vv.corvair.org/archive.htm

Today's  Topics:

1. Re: EARLY WINDOW REGULATOR BINDING  (N2VZD at aol.com)
2. Re: EARLY WINDOW REGULATOR BINDING  (hallgrenn)


----------------------------------------------------------------------

Message:  1
Date: Wed, 4 May 2016 12:40:38 -0400
From: N2VZD at aol.com
To:  virtualvairs at corvair.org
Subject: Re: <VV> EARLY WINDOW REGULATOR  BINDING
Message-ID:  <fa07d.78beaf1b.445b7fca at aol.com>
Content-Type: text/plain;  charset="US-ASCII"

I have a 64 convert here for other issues , fixed  all but the front 
drivers 
door window regulator is very tight, almost  impossible to work. The glass 
seems  free , but shaft works hard. I  have tried lubing at the shaft and 
everywhere I  can without removing  the assembly. I was trying not to get 
involved in body work  , plus  it has new door panels on it.
Any "on car" repairs?
On another  note , this car is the first failure of a Crane XR700 ignition 
I 
have  seen. Replacing the module fixed it.  I must have at least 5 or  more 
 
out there , including my own on Rampy , which is at least 20  years  old.
Regards, Tim  Colson

------------------------------

Message: 2
Date: Wed,  04 May 2016 13:51:38 -0400
From: hallgrenn <hallgrenn at aol.com>
To:  N2VZD at aol.com, virtualvairs at corvair.org
Subject: Re: <VV> EARLY  WINDOW REGULATOR BINDING
Message-ID:  <0jla9hfeqr0fuyna304cblsw.1462384298282 at email.android.com>
Content-Type:  text/plain; charset=utf-8



Hi Tim,
Is the door  glass too loose in the channels, causing it to get cocked and 
bind? ?If so  it's usually the lower anchor point (front or back channel) 
that is loose or  out of adjustment. ?Hope it isn't rusted out.....
Bob


Sent on  the new Sprint Network from my Samsung Galaxy  S?4

------------------------------

Subject: Digest  Footer

_______________________________________________
This message  was sent by the VirtualVairs mailing list, all copyrights are 
the  property
of the writer, please attribute properly. For help, mail to:  
vv-help at corvair.org
This list sponsored by the Corvair Society of America,  
http://www.corvair.org/
VirtualVairs at corvair.org
http://www.vv.corvair.org/mailman/listinfo/virtualvairs
Change  your options:  
http://www.vv.corvair.org/mailman/options/virtualvairs

------------------------------

End  of VirtualVairs Digest, Vol 136, Issue  7
********************************************