<VV> What's going on?

[Dave Keillor]

Rings not yet fully seated?  What happens when you add a bit of oil to a
low cylinder?


Dave Keillor

On Tue, Nov 8, 2016 at 10:17 AM, Mike McCrae via VirtualVairs <
virtualvairs at corvair.org> wrote:

> I just assembled and engine , broke in the cam and ran it for a day. Just
> for grins, went back and ran a compression check. All cylinders at 150#’s
> +- 10 except number 5 which
> consistently gives 200#’s compression on the gauge????
> The heads were all cc’d with 52cc, head and base gaskets are all the same,
> deck heights are all the same, and cylinder lengths are equal (they haven’t
> been cut)...what gives...?
>
> Mike McCrae
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/
> mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>  _______________________________________________