<VV> drain plugs for a 1963

[Billsmileyiii]

Thanks Matt,
That should add to the degree of difficulty 
Bill
 

You only live once but if you do it right ...once is enough

When you are lucky enough to be at the beach...... you are lucky enough :)    
                                                


 
-----Original Message-----
From: Matt Nall via VirtualVairs <virtualvairs at corvair.org>
To: virtualvairs <virtualvairs at corvair.org>
Sent: Mon, Aug 14, 2017 1:45 pm
Subject: Re: <VV> drain plugs for a 1963



I have the 1961 shop manual but not the 1963 supplement. It shows the
location of the drain plugs for the manual transmission and the transaxel. 
I am out of town and don't have access to our 1963 corvair so I can crawl
under to look. I was just told that the 1963 model does not have drain plugs!! 
Is that correct? If no, what is the best way to change the gear lube?  

Bill 'y
============================================================


Correct!!  you use a "suction gun"  or Pump  AFTER you warm the lube up,  hopefully.   Many add the plugs..


Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Corvair-Patio

http://tinyurl.com/Matts-Tech-Pages








 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________