<VV> . Upper A-arms

[Jim Becker]

Different left/right
Same early/late

-----Original Message----- 
From: James Cuneo via VirtualVairs
Sent: Friday, February 10, 2017 6:38 PM
To: Dave Leonard ; virtualvairs at corvair.org
Subject: Re:  . Upper A-arms

I am positive that they are different on a LM, take it from someone who 
recently did a complete rebuild. There is a right and a left.

Jim C.


________________________________
From: Dave Leonard <dave at arborlea.com>
Sent: Wednesday, February 8, 2017 2:44 PM
To: virtualvairs at corvair.org
Subject: Re: <VV> . Upper A-arms

I'm fairly certain that the A-arms are the same left and right, as are the
cross-shafts, but for some reason I believe the cross-shaft mounting holes
are not symmetrical (ie., equal distance from each end), and thus could be
installed "backwards" shifting the A-arm forward or back a bit.  I may be
totally wrong on this, as it's been a long time since I rebuilt a front
suspension.  And I don't have one convenient to go measure.


Dave




_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
_______________________________________________