<VV> 1964 powerglide transmission still leaks a little, where? / Belts

[Michael Kovacs]

My TV O ring leaked even with a new O ring. Tim Colson suggested that there might be a bit of corroison inside the PG where the O ring should seal. I managed to make a tool that was wrappd with very fine wet/dry sand paper and give it a couple of twists.
 It hasn't leaked since. 
 

    On Monday, April 2, 2018, 11:34:05 PM EDT, Joel McGregor via VirtualVairs <virtualvairs at corvair.org> wrote:  
 
 Just to summarize leak locations:
External:
1) TV o-ring
2) Governor o-ring
3) Shift cable o-ring
4) Shift cable housing cracks
5) Pan gasket
6) Dipstick tube connection
7) Front pump o-ring/gasket/bolts
8) Rear seal
9) Stator shaft o-ring in differential
10) Modulator gasket

Internal:
2 seals and one pinion adjuster o-ring sealing transmission fluid from differential

As suggested yours is probably 1, 2, 3 or 4


Joel McGregor
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________