<VV> Bench Testing a Pertronix

jvhroberts at aol.com jvhroberts at aol.com
Tue Apr 9 19:13:36 EDT 2019

 Should be. Put it in a distributor, connect it to a coil and a 12VDC source as per the fdirections, spin the shaft and viola!!! I've done this many times on various electronic ignition conversions, especially those using OEM bits.
John Roberts
-----Original Message-----
From: Brian via VirtualVairs <virtualvairs at corvair.org>
To: VirtualVairs <VirtualVairs at corvair.org>
Sent: Tue, Apr 9, 2019 7:01 pm
Subject: <VV> Bench Testing a Pertronix

Is there any way to do it?
Remember Her? Try Not To Gag When You See Her Now
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm

More information about the VirtualVairs mailing list