<VV> EM wheel alignment Specs?

[Hugo Miller]

That's weird - why so much toe-in on the rear wheels? It is going to 
increase even more under power.

On 2019-06-07 15:47, Matt  via VirtualVairs wrote:
> ’62 with no swaybar?
>
> Front     0.5 degree negative camber,  ¼”  toe-IN [ total] ,   3
> degrees POSitive Caster.
>
> Rear     0.5 degree  negative camber,  ¼-3/8”  Toe IN!
>
> Make sure and have the rear grill off and  Motormount  cover off so
> they can move the powerpack easily.
>
> Matt Nall
> Sea Mtn., Or.
> Sent from WinMail15
>
> From: corvairamy62--- via VirtualVairs
>
> I'm getting an alignment on Monday. I bought the Clark's alignment
> pamphlet but as usual my "putting it in a place that I'll remember "
> turned out to be a black hole and is nowhere to be found. Do any of
> you have the proper specs so I can tell the youngsters doing the job
> the proper alignment?Thanks so much
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all
> copyrights are the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>  _______________________________________________