<VV> FC West coast mirror top bolts needed
hugo at aruncoaches.co.uk
Fri Jun 19 16:17:18 EDT 2020
My mirrors came with big square plastic inserts & self-tapping screws.
I didn't use them - I just bolted it through top & bottom with small
stainless nuts & bolts.
On 2020-06-19 20:58, Charles Sadek via VirtualVairs wrote:
> Hi Folks,
> I am rebuilding my FC west coast mirrors. The mirror is held thru a
> with two bolts on top and two brackets on the bottom below the vent
> The top two small bolts on each side go from the inside of the
> vertical top
> of the front door into a bracket attached to the outside with two
> partial hex-head ¼-20, ¼”-3/8” inch long machine screws. The heads
> like a very thin hex with most of three sides removed to make a flat
> which goes against the inside horizontal portion of the top of the
> door to
> keep from turning. The bolt goes thru the door, thru a bracket and is
> secured with an acorn nut. Anyone have a source? I need four.
> If not, I will make my own.
> Chuck Sadek
More information about the VirtualVairs