<VV> Powerglide Kickdown

[Matt Nall]

Brian, The adjustment you need is at the Crosshaft.  Unhook the return spring and turn the swivel 1/4" towards the front of the car. Test drive and adjust from there.
Matt NallVV ChairmanOregon coast


-----Original Message-----
From: Juno Mail via VirtualVairs <virtualvairs at corvair.org>
To: VirtualVairs at corvair.org
Sent: Thu, Aug 4, 2022 8:08 am
Subject: <VV> Powerglide Kickdown

I am working on a 1965 Powerglide convertible.  After the trans was redone by the Ranch, the car does not have a kickdown gear regardless of throttle position.  The Ranch tells me the valve adjustment (using the special tool) inside the trans is correct.  I believe them.  Under light throttle it shifts from low to high at about 15-18 MPH.  Any tips or davice about how to adjust the rod from the gas pedal to the lever on the side of the trans?  Any assistance greatly apricated.  Thanks.
 _______________________________________________
___________________________