<VV> Corvair Belt Wrench

Ron ronh at owt.com
Fri Aug 25 21:11:59 EDT 2006


I just go to the local nut & bolt house and buy what I need. He has them 
with a 1/2" hex.
RonH

----- Original Message ----- 
From: "Terry Kalp" <tkalp at cox.net>
To: <VirtualVairs at corvair.org>
Sent: Friday, August 25, 2006 6:03 PM
Subject: Re: <VV> Corvair Belt Wrench


> Ron,
>
> Where do you get your large nuts?
>
> The factory stud for the belt adjuster is fine thread.   Matter of fact I
> just ordered some 3/8 fine thread coupler nuts from Grainger this 
> afternoon.
> Rather than buy a special tool for each of the Corvairs I drive or keep
> switching  the wrench from one car to another,  the nuts are pretty cheap.
> Graniger did have the 3/8 and 1/4 flange bolts for the shrouds in stock.
>
> Terry Kalp
>
> ----- Original Message -----
> From: "Ron" <ronh at owt.com>
> To: <VirtualVairs at corvair.org>
> Sent: Friday, August 25, 2006 7:39 PM
> Subject: Re: <VV> Corvair Belt Wrench
>
>
>> Why bother with special wrenches when long nuts are so much simpler.
>> RonH
>>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> 



More information about the VirtualVairs mailing list