Valuable Smog PCV parts, was: <VV> carbs

[airvair]

Just so everyone is aware, the smogger setup uses a rerouted PCV tube
and air intake crossover (I call it a spider - especially on a 140) that
is ESPECIALLY PRIZED if you have A/C with a '66-7 style condenser core.
Using the tube and spider from a smog car along with the non-smog air
cleaner, it allows you to simply lift off the air cleaner. You don't
have to fight the PCV tube for possession of the cleaner, and end up
banging it into the fragile fins of the condenser core. Just plug up the
non-smogger's PCV intake hole with a rubber plug (Clark's sells them).
Also available from Steele Rubber as an "antenna hole" plug for a '57
Chevy - in the all-purpose plugs section.

-Mark

Brent Covey wrote:
> 
> You can also switch to 1965-'67 style non-smog aircleaner and PCV system
> items if you'd like to remove the last vestiges of the AIR parts sometime.
> These are very common and inexpensive parts, someone in your Corvair club
> almost certainly will have all the peices you need and sell them cheap or
> more likely, give them away to you;-)
> 
> Brent Covey
> Vancouver BC
>