<VV> Time to Replace pump

[J R Read_HML]

Oh, I forgot - you have to move the fitting over for the main line from the 
old pump to the new one.  Or, you could have your spare pump already set up 
with a fitting on it.

Later, JR

> If it takes a half hour, you need a new approach.
>
> Disconnect the main line in.  Loosen the nut/bolt combination holding the 
> pump in place.  Pull the pump up high enough to clear the housing.  Do not 
> disconnect the lines to the carbs.  Turn the pump (maybe 8 - 10 turns) 
> until it comes off of the T.  Install new pump be reversing this.  10 
> minutes, maybe 15 tops!
>
> Attachments (if any) are scanned with anti-virus software.
>
> Later, JR
>