<VV> front wheel camber

[Frank DuVal]

Check to see if anyone previously installed alignment shims on the upper 
control arm bushing rod. Lates do not use shims here, only earlies. Also 
check the upper control arm bushings and upper ball joint for noticeable 
wear.

Difficult, but see if crossmember is bent.

Frank DuVal

robert guerin wrote:

>I just replaced my lower ball joint on the the left front of my 65 corsa and I can't get the camber that the sepc's call for.Which is positive 1 degree plus or minus 1/2 degree within 1/2 of other wheel.
>The right wheel looks about right bubble on the positive side about 3/32nds. I've got the cam max. on the left and can't get positive (about 1/4 in. neg.)
>I really don't know what it was before I replaced the ball joint.Hope someone has some ideas about this problem.
>
>Thanks Inadvance
>Robert Guerin
>65 corsa conv.
>64 deluxe greenbrier
> 
>  
>