<VV> Corvair steering box lash adjust screw turns with locknut ?

corvairduval at cox.net corvairduval at cox.net
Tue Aug 24 01:48:00 EDT 2010

IIRC, the screw has a head captivated by the "sector shaft?" or output
shaft, and cannot be removed by unscrewing it. The head slides into a slot
at the top of the shaft.

Frank DuVal

Original Message:
From:  HallGrenn at aol.com
Date: Mon, 23 Aug 2010 22:36:01 EDT
To: virtualvairs at corvair.org
Subject: Re: <VV> Corvair steering box lash adjust screw turns with locknut

In a message dated 8/23/2010 10:31:13 P.M. Eastern Daylight Time,  
Chaz at ProperProper.com writes:

If I  turn the screw out (CCW) to get the locknut free from the screw, will 
I damage  anything ?


No.  Just don't let any grit get into the hole if you take it all the  way 
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 

mail2web - Check your email from the web at

More information about the VirtualVairs mailing list