<VV> Head Temp Gauge(s) for Corvair @ 500+ degrees ?

[jvhroberts at aol.com]

 One can have too many gages. Personally, one should suffice. For sure, on turbo cars, one is enough. Now, if you have major carb sync issues, one side will run hotter than  the other, etc., but almost without exception, you'll know something's wrong without a second gage. 

 

John Roberts
 

 

-----Original Message-----
From: Bryan Blackwell <bryan at skiblack.com>
To: Charles Lee <Chaz at ProperProper.com>
Cc: VV <virtualvairs at corvair.org>
Sent: Mon, Aug 30, 2010 9:36 am
Subject: Re: <VV> Head Temp Gauge(s) for Corvair @ 500+ degrees ?


A few gauge options here:



http://autoxer.skiblack.com/interior.html



--Bryan



On Aug 29, 2010, at 5:17 PM, Charles Lee wrote:



> Installing a Corsa dash might be tricky on a 1967 Monza PG, but in the

> meantime, I'd like to monitor both sides ?  Is that really necessary ?



 _______________________________________________

This message was sent by the VirtualVairs mailing list, all copyrights are the 

property

of the writer, please attribute properly. For help, mailto:vv-help at corvair.org

This list sponsored by the Corvair Society of America, http://www.corvair.org/

Post messages to: VirtualVairs at corvair.org

Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 

 _______________________________________________