<VV> Experience with EM 500 W/S Gasket

[Mark Durham]

Hank, all of the EM windshields installed the same way. Clarks sells the
tools to make the job easier, but essentially, you have to add cord to the
groove and pull the inner lip over the frame with the cord. Its tedious
work, and something you have to be careful doing. The trim is installed
after you get the windshield in place and sealed. Mark Durham

On Thu, Jan 28, 2010 at 6:59 AM, <kaczmarek at charter.net> wrote:

> We  had a customer send in a EM W/S gasket for a 500 model (no Chrome
> Trim), and wanted to know if Steele could reproduce it.
>
> My experience with EM's is limited to what I sell every day.  But I knew
> the last time I looked (which was a piece back) there wasn't one available
> for 500's.
>
> Design asked me to check Clark's to see if they offered one, and they do.
>  I called Clark's and Barb told me they've been selling them since 97.
>
> Has anyone installed a Clark's EM W/S gasket without the chrome groove?
>  Has anyone had any trouble with it?
>
> When there is a part already in the marketplace, we don't necessarily want
> to clear another trail so to speak, as tooling and testing prototypes is
> expensive.
>
>
> Any feedback on this issue would be appreciated.
>
>
> Hank
>
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>