<VV> electrical/ignition problems cont'd / Coil check

Matt Nall patiomatt at aol.com
Wed Jun 2 16:29:15 EDT 2010

To TEST a coil....  

remove wire from NEGATIVE... check this wire to see if you have a ground...otherwise  use a jumper from NEG  to touch to ground

turn on ignition

 Pull coil's High Tension lead from  Distributor cap... and hold end 1/4"  from metal / ground

Jumper / connect NEG  to Ground..hold for 1 second...  remove

As you remove from ground..spark should jump from HT  lead to ground.

If this shows it's working...  problem is your points /

Matt Nall
Charleston, Oregon


More information about the VirtualVairs mailing list