<VV> Early ignition switch cylinder replacement.

[Harry Yarnell (Verizon)]

If I remember, you stick a pin (paper clip opened up) into the pinhole in the tumbler, and rotate the cyl while pulling (prying) the tumbler out of the switch.



-----Original Message-----
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of Norm Wright via VirtualVairs
Sent: Tuesday, March 28, 2017 10:26 AM
To: Virtual Vairs
Subject: <VV> Early ignition switch cylinder replacement.

 I recently acquired an early with no key, and the ignition in the "on" position.  After trying every one of my collection of B-10 keys with no luck, I got another cylinder with keys.  Now the problem;  How do I remove the useless cylinder when I have no key to get it into the lock position?  I'm thinking I may have to resort to hammer and chisel tactics, which I hate to do to any Corvair.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________